compare_file uses the
built-in converters, names them
in its answer and says whether the files are also identical byte for
byte. original compares the bytes instead. On the command line
the same comes with /report --convert.
Folder comparisons stay byte for byte, and your own converter rules
never run there./report --ignore-blank-lines)
passes over empty lines, so that empty paragraphs no longer fill the
answer. When only one of two files can be converted, both are
compared byte for byte; the reason is read from the file
(password-protected, or a Word or Excel file older than 97)
instead of guessed. Two Office files with equal texts but different
bytes come with the parts of the package that differ and the
document properties that changed (author, dates, program).convert_file, so an assistant can read a document
without comparing it. A file that cannot be converted is named with
its cause, never shown as bytes..doc), Excel 97-2003 workbooks
(.xls, with their formulas) and PowerPoint 97-2003
presentations (.ppt, with their notes): two old files, or
an old one and a new one, are compared as text in the window and over
MCP. Two old Office files that differ also show which of their parts
and document properties (author, dates, program) changed.4370 (=B4*C4): a changed formula with the same result is
a difference now. Empty rows keep their place, so the rows of a sheet
stay where they are..tmp file in the report folder.#define, or a list beginning with
“BA” or “BM”, was taken for an image, could
not be loaded, and the comparison failed; a file beginning with the
two bytes 00 60 opened as a 320 × 200 picture.
Formats whose header is too short to tell (Targa, PCX, PNM, PFM, HDR, Koala,
SGI, ICO) now also need their usual extension, and X bitmaps
(.xbm, C source) are always shown as text.Release.zip\Release-2.4.0) is looked up once; every
further step into it searched the archive again.\\?\ prefix of long paths.subst now deletes into the Recycle Bin: Windows keeps
none for such a drive, and the deleted files were gone for good
without a word. Diffoniq now recycles them through the folder the
drive stands for. A target without a recycle bin is said so before
the run: a network path, also behind subst, and a USB
stick or a memory card, where Windows deleted for good as well. The
window checks and greys Permanent, and /sync
writes permanent=yes (network path, no recycle bin) or
permanent=yes (removable drive, no recycle bin).Über.txt and über.txt). For Windows
that is one file, and Diffoniq treats it as one now. Until 2.4.0 a
mirror copied the file and then deleted it: on a target without a
recycle bin, or with Permanent, the file was gone afterwards;
with the Recycle Bin, the run ended with an error about a file that
could not be found.copynew also when the comparison had paired it with a
different file on the other side as a rename candidate; it was listed
and counted as a changed file.--content, a new file and a deleted one that only happened
to have the same size and time were taken for a renamed file: the
mirror renamed the old file, kept its old content under the new name,
and no later run corrected it. Such a pair is now copied and the old
file deleted. A file that a cloud service keeps online only is not
read for this, so it is not downloaded.#NAME?; in an .xlsx
file, a formula copied down or across that refers to whole columns or
rows (SUM(A:A)) with the column or row of its own cell.
An old Office file with another document embedded in it is read from
its own text, not from the embedded one.release.zip\release-2.4.0 against the
build folder pairs every file by name, without the extra top folder
getting in the way. Works on the command line, in the selection
dialog and with /report, also through nested archives
(outer.zip\inner.zip\sub).--progress for /report and
/sync.diffoniq.portable in it keeps settings,
the content-hash cache and the license file in the extracted folder,
without creating diffoniq.ini by hand. The ZIP contains no
diffoniq.ini, so extracting a newer version over your
folder keeps your settings, and deleting diffoniq.ini no
longer moves settings and license to %APPDATA%. An empty
diffoniq.ini created beside an old wdiff.ini
takes over its settings once.diffoniq.ini can be
restored at start.Files listed: *.ini;*.json), per side when the sides
differ; before, a report filtered by a mask read like a complete one.
A report exported from the window now also names its Exclude fields
and the .gitignore filter, and the plan of
/sync names the mask too.-s or -t 8 apply to the run they start and
are no longer saved as your settings.Märchen
against Mörchen) or be marked on its neighbour..BAK.
A temporary file of a save that did not go through no longer stays
beside the file.DiffoniqC.exe /mcp offers three
read-only tools: compare two folders or archives, compare two files,
and preview a synchronization without changing anything. The answers
are kept short: an overview of the folders with the most
differences, one line for a folder that exists on one side only, and
a size limit with a note on how to see the rest. Files that a cloud
service keeps online only (OneDrive and other providers using the
Windows cloud files API, and every file on a drive labelled Google
Drive) are never downloaded unless the assistant asks for it
explicitly, or the server was allowed to once and for all
(DIFFONIQ_MCP_ONLINE=read). The assistant can leave out
patterns such as
backup files, page through long lists and ask for the moved and
renamed files only.--out - writes the report to the standard output,
--only lists only the states you name and
--max-entries limits the list, while the summary still
counts everything. --under lists one folder,
--collapse shows a folder that exists on one side only
as one line, --folders adds an overview of the folders
with the most differences, and --defaults compares with
the factory settings instead of the window’s (also for
/sync), and --skip-online-only leaves files
kept online only by a cloud service unread (also for
/sync). --exclude leaves out wildcard
patterns on both sides and --offset pages through a cut
list (both also for /sync); --only renamed
lists the moved and renamed files, and the JSON summary says in
renamedUnlisted how many of them the list left out. A JSON file report says whether each file was
read as text, binary, image or version information.--format json), to a file or the standard output./sync --execute no
longer need a license. An unlicensed /sync run writes
license: none (evaluation) to its log, as the report
log already did; the dialog writes no log. Nothing else changes. Up to 2.2 the trial could only
preview a sync.gitignore
rules of both folders as a further exclude filter, so a repository
compared against its backup shows neither node_modules
nor build. The full git syntax is understood, including
the files above the compared folder up to the repository root. Each
side follows its own rules and borrows the other side’s where
it has none; what only one side ignores is listed on the other side
and counted apart. A hidden folder is never read, and the status
bar, a report and the sync log say how many entries the rules hid.
The command-line twin is /gitignore, also for
/sync (which never touches what either side
hides) and /report.gitignore or .git is in sightouter.zip\inner.7z instead of a temporary
file, an encrypted archive that is also damaged still says it is
encrypted, a path with umlauts reads correctly, and the path appears
only once/report --content alike.
Re-verify Contents (Ctrl+F5)
reads the folder side again there too"version":
"2.1.1" in JSON) instead of the short form “2.1”./report (exit code 3); before, an
archive with encrypted content stopped with “unreadable file or
folder”./sync and /report land in the right folder
too. With a user name outside the Windows character set (Greek,
Cyrillic, Chinese ...) the license is found again, and the help opens
from a portable copy in any folderDiffoniq/2.0.2 (Windows 11; x64). Nothing else is sent:
no license data, no usage data, no identifiersDiffoniqC.exe
next to Diffoniq.exe: scripts call it with the same arguments, and the
shell waits, gets the exit code and sees the log lines of
/report and /sync. Ctrl+C stops the run--content compares
size and timestamp as described: it no longer takes over the
window's Ignore Date/Time setting, whose factory default left only
the size — an edited file of unchanged size, or a copy cut short,
was not synchronized. Timestamps up to 2 seconds apart count as
equal (FAT drives)--content no
longer calls a same-size pair “identical”: such pairs are
counted as not compared (JSON notCompared),
and the report header says that contents were not read. Only
--content or the window can confirm that two files are
identical--reverify for /report and
/sync: reads every equal-sized pair again instead
of trusting the hash cache, so a scheduled
backup check also finds a file changed without a change in size or
timestamp/sync) does the same headlessly,
built for the Task Scheduler — dry run by default, renamed files
are renamed instead of recopied, and the hash cache makes repeated
--content runs almost free/report ... --out <file> does
the same for scheduled runs — together with /sync, a
nightly job that leaves a result on your desk. A report or printout
from an unlicensed evaluation copy says so in its footergit difftool, TortoiseGit/TortoiseSVN, Total Commander,
WinSCP): started with two paths, Diffoniq opens the comparison straight
away — the evaluation reminder does not interrupt the calling tool,
neither on the way in nor on the way out. The new
/read-only switch locks editing, saving and Synchronize for
one run, for hosts that hand over temporary copies;
/read-only-left and /read-only-right lock a
single side, for the common case where only one of the two paths is a
temporary copy. /no-backup and /backup decide
for one run whether saving keeps a .BAK copy — useful
when the host compares into a version-controlled working tree. Started
this way, Esc closes Diffoniq, because there is no directory
comparison to go back to*.cpp) no
longer stops the subdirectory scan, several masks can be combined
(*.cpp;*.hpp), and exclude patterns now work
case-insensitively and also inside archives; directory scans with
filters can be cancelledFind "Marker": 3 / 400), and Esc removes the
match highlighting/t4 or /gs- are accepted again (see
Command Line Arguments)-, -- or /;
--version and --help answer in a message box;
and anything unknown is rejected with a message and exit code
3 — never a silent success (see
Scripting and AI Assistants)--out or --log appears under its final name
only when it is complete, so a script that waits for the file can never
read a half-written resultnotes.txt.BAK instead of notes.BAK), so
test.h and test.c no longer share one
backup; the backup can be switched off in the
File Comparison Options, and a failed
backup asks before saving without one| v1.59 Nov/2013 |
Explorer-like File Context Menu (right mouse button) in directory comparison File information status header on file comparison (Date, Size, Lines, Line-Separator) Binary Directory Comparison Mode Also handles CR/CR/LF type line delimiters |
| v1.51 Oct/2005 |
Display of image files (gif, jpg, png, bmp, ico, pcx) side by side New color definition for ‘modified’ lines (pasted, deleted) File context menu in directory mode Ability to exclude files or directories from directory comparison view (one or more wildcard definitions) Directory comparison column titles contain an indicator if currently selected for sorting Bug fixes (Printing, Scrolling) |
| v1.50 Sep/2002 |
Expanded print functionality Recursive subdirectory comparison, even inside of ZIP files Case insensitive directory comparison Country specific date format Selectable number of ‘margin lines’ in file comparison display |
| v1.49 Nov/96 |
Inline difference highlighting 32-bit version for Win95/WinNT Paste lines from clipboard into marked area Integrated UnZIPer |
| v1.01 May/93 | Initial release of WDiff |